欧美图亚洲色另类色在线

    1. <li id="k08ph"></li>
      <th id="k08ph"></th>

      1. <tbody id="k08ph"><pre id="k08ph"></pre></tbody>

        İ
        English
           
         
        Temperature cont...
           > ZWK/WCK intell...
           > .Heat treatmen...
           > .DWK-C type co...
        Ceramic electr...
        Welding rod ov...
        Flux drying ma...
        Electric air b...
        Multipurpose s...
        Electric heate...
            Products

          [Close]
        Tooling shell heater

        On the basis of LCD type crawler type ceramic heater, supporting iron shell, high temperature heat-resisting material of internal crucible, made into integral type, with handles convenient for moving iron casing heater, according to workpiece size, made of various iron shell heating The device, which is suitable for preheating of the workpiece before welding, the size should be selected according to the geometry of the workpiece, wall thickness and heat treatment process the corresponding specifications, the following table only some of the specifications.
        Model Heating Size (mm) Working Pressure (V) Rated Voltage (KW) Applicable Pipe Diameter
        Bendable edge straight edge
        LCD26-220 660330 220 10 219
        LCD33-220 860260 220 10 273
        LCD39-220 1020220 220 10 325
        LCD44-220 1160200 220 10 377
        LCD52-220 1360160 220 10
        LCD70-220 1860120 220 10
        LCD19-220 500450 220 10 159
        LCD16-220 420530 220 10
        LCD19-110 500220 110 5 159
        LCD16-110 420260 110 5
        LCD23-110 600180 110 5
        LCD10-55 260200 55 2.5
        LCD16-55 410120 55 2.5
           
        The complete metal component heat treatment equipment consists of three parts, namely ceramic electric heater, temperature control box and auxiliary materials.

        1. Ceramic electric heater: The heating element is the source of heat when the workpiece is heated. Our company provides you with a variety of models and specifications, they have their own characteristics, performance is not the same. Such as LCD track heaters, SCD-type rope heaters, NJ-type heat frame heaters, etc., generally require the user to choose according to the shape of the heated workpiece, thickness and the desired temperature value.
        2. Temperature control box: It is matched with the ceramic electric heater to provide power for the ceramic electric heater and control its working status to achieve the purpose of temperature control. The temperature control box is equipped with a temperature controller to control and measure the temperature of the workpiece. The configured temperature recorder is used to record the temperature curve of the workpiece in real time so that the user can archive the temperature. At present, our company provides users with various models of temperature control boxes, such as ZWK, WCK, RWK series of intelligent temperature program control box, DWK, TCS series computer temperature control box, LWK series temperature control box, etc. The user needs to select the ideal and practical temperature control box according to the heating range, heating process requirements and site requirements.
        3. Auxiliary material: mainly KJ-type quick-connected wire (connecting wire between the temperature control box and heater, also used for 36V, 55V, 110V and other heaters in series, and equipped with quick-connect plug), thermocouple (temperature sensor , Used to measure the temperature of the heated workpiece), compensation wire (connection line between the thermocouple and the temperature control box), high temperature insulation cotton aluminosilicate (to prevent heat dissipation).

        Use cautions:
           1. The heated workpiece must have a reliable ground.
           2, the heater does not allow overlap.
           3The thermocouple should be attached to the workpiece reliably.
        Note:
           1. The width of the heater should be 8-12 times the wall thickness of the heated object.
           2, according to the needs of users can supply complete sets of lead cables, thermocouples, insulation materials and special temperature control cabinets and capacitive soldering coupler.
           3, power error is 3%, shape tolerance is 2%.
           4, special specifications can be customized.

         
        Copyright©Wujiang Xinsheng Electric Equipment Co., Ltd.  KICP11054944̖   Httphttp://www.marteritsolution.com   
        Tel.0512-63685811  Fax.0512-63685810   Mob.13962586530   Add.Meiyan Development zone,Wujiang city,China
        欧美图亚洲色另类色在线
        1. <li id="k08ph"></li>
          <th id="k08ph"></th>

          1. <tbody id="k08ph"><pre id="k08ph"></pre></tbody>